Are twenty foot lengths (20’) of all thread rod available?
20’ lengths of all thread rod are not commercially available off the shelf and would have to be custom made to order. In most instances, all thread rod is cut to length and it is more economical to use more sticks of standard 12 foot and shorter sizes. If a 20 foot connection is needed, and the application allows, it is more economical for us to manufacture the rod with only the needed amount of thread on each end. If the application truly needs to be all thread longer than 12 feet in length Portland Bolt can thread it if necessary.
is all thread anchors as strong as round bar anchors?
@Maurice- It depends. In many applications where the anchor is in tension, there shouldn’t be any difference. However if there are shear forces, then the full body of the anchor will be superior to the reduced area of the threads.
Hi ..we are looking for 96 x 2 in dia. threaded rod galvanised x 15 feet long …are you able to provide this length ?
@Nancy- One of our inside sales people will contact you shortly.
I’m looking for 20’ galvanized steel rod 1/2 or 3/4 “ dia.
5’ ends threaded will be fine.
Quantity of 25 with a possibility of 60.
Please quote 25 in piece price with freight on 60.
3742 Belle Isle Drive
Mobile, Al 36619
Mike
251-379-1404
@Mike- One of our salespeople will be contacting you shortly.
Are you able to provide design Calc for 3/8-1″ dia rods
Need for project in Arora Colorado need 20″-0″
@Robert- We are happy to talk you through available materials and their respective chemical and mechanical properties, but we do not have any engineering calculations available.