Clipped hardened washers are used where space limitations require one side to be clipped. These washers provide a smooth bearing surface and are used under the head of a bolt and/or a nut. The chemical, mechanical, and dimensional requirements for hardened washers are covered under the ASTM specification F436. Clipped hardened washers are through hardened or carburized to add strength, but are physically smaller than a standard F844 flat washer. See Portland Bolt’s technical information for suitable bolt or anchor bolt recommendations.

Available

Diameters: 1/2” – 2″
Origin: Domestic
Finish: Plain and hot-dip galvanized

Dimensions

Click table to show drawingClipped Hardened Washer
Bolt Size A B T E Weight (lbs.) Per 1000
Outside Diameter Inside Diameter Thickness Min. Edge Distance
Min Max
12 1116 1732 .097 .177 716 17
58 1516 1116 .122 .177 916 32
34 11532 1316 .122 .177 2132 40
78 134 1516 .136 .177 2532 63
1 2 118 .136 .177 78 82
118 214 114 .136 .177 1 98
114 212 138 .136 .177 1332 137
138 234 112 .136 .177 1732 160
112 3 158 .136 .177 1516 200
134 338 178 .178 .228 11732 300
2 334 218 .178 .228 134 360

Dimensions per SAE Pattern to ASTM F436